Robbins 61R Drill Rig
Raising Australia has been successfully operating two Robbins 61R drill rigs for several years.
These machines have been shortened down so they fit into a normal 5m x 5m drive, which means that stripping of the drill site is not required in most cases.
These machines are capable of drilling holes up to 150m in length and to a diameter as small as 0.6m up to a diameter of 2.1m.
These machines are perfect for all escape-ways and slots.
To view the condensed specifications of the Robbins 61R follow this link.
Robbins 123RHC Drill Rig
The Robbins 123RHC is capable of drilling holes up to 6m in diameter and up to a length of 1000m depending on ground conditions.
The machine is very compact and has an extended height of 5.7m which makes it ideally suited for all larger diameter holes that need to be drilled underground.
The compact size means that minimal stripping is required beyond the normal drive size to fit the machine, unlike the much larger machines that require a minimum 8m back height.
The machine has a diesel powered crawler which allows for easy transportation to and from the drill site.
To view the condensed specifications of the Robbins 123RHC follow this link.
Robbins 56RL
The 56RL is a low profile machine capable of drilling holes up to 1.8m in diameter to a length of 150m.
The machine fits comfortably into a 5m x 5m drive and is perfect for drilling slots and escape-ways.
The machine runs off 1000v power and simply plugs into a Jumbo starter box.
View the condensed specifications of the Robbins 56RL by following this link.
Robbins 34RHC Box Hole Machine
The Robbins 34RHC is a versatile machine and is capable of drilling both conventional raise bores up to 100m in length and 1.5m in diameter; and 1m blind holes to a length of 50m.
This machine comes with its own diesel powered transport crawler which allows it to be self sufficient.
To view the condensed specifications of the Robbins 34RHC follow this link.